Intro to 3D Printing Online Hybrid Edition

This class provides hands-on training in 3D Printing and rapid prototyping. This class focuses on Hacker Lab’s Monoprice and Tazbot 6 3D printers as well as the the Cura slicer program.

Things you will learn:
-Overview of 3D printing technologies, and which ones Hacker Lab has
-Rules, policies, & procedures for printing at Hacker Lab
-Available CAD training & common software used
-Overview of the Cura slicer program, and differences between the two version of Cura Hacker Lab’s printer’s use
-How different configuration options within Cura can affect print quality, speed, and resolution
-Printer setup
-Use of the Monoprice 3D printers, step by step
-Use of the Tazbot 6 3D printers, step by step
-Leveling the bed
-The SD card and menu
-Launching a print
-Watching for errors, what to look out for
-Removing your print

Important: This class is being taught as a hybrid between online and in-person sessions. The online portion is held via Zoom and will run 2 hours. New for April, both members and non-members may take the online portion of this class. At the end of the online session, the instructor will post signup times for the 30min 1-on-1 in-person portion which is available to Hacker Lab members only. To be certified to use Hacker Lab’s 3D printers you must attend the online portion then schedule, attend, and pass an in-person final certification.

It is strongly recommended that you download and install the Lulzbot version of cura (links below) so you can follow along during this class.